PHOTO LUMINESCENT - FLOOR MARKING TAPES, FILMS & SIGNAGE

Ideal for health & safety, particularly in heavy duty environments: ramps, steps, stairs, scaffolds, platforms & walkways in manufacturing & construction environments.

BGR Classified R11 for slip resistance in use as a floor graphic.

Observes DIN 51130 & BGR 181 for ramp test slip resistance of floor coverings.

Photo luminescent properties conform to PSPA Class B (high performance when charged in bright lighting conditions). 

For more information on photo luminescent products, please contact us on 01698 748290 or This email address is being protected from spambots. You need JavaScript enabled to view it.

REFLEXITE VC104+ RIGID GRADE 

Also available for curtain side & tankers.

A tough weather and solvent resistant product designed for rugged outdoor use. Intended for application as a conspicuity marking on trucks and trailers with rigid sides.

Available in Yellow, White & Red - approved to regulation ECE104 Class C.

For more information on the Reflexite products, please contact us on 01698 748290 or This email address is being protected from spambots. You need JavaScript enabled to view it.

ANTI SLIP TAPES, MATTING & MESSAGE CLEATS

Jessop SafetyTrack 3360, 3300 & 3375 Anti Slip are commercial grade - certified by the National Flooring Safety Institute (NFSI) as exhibiting "High Traction". Combining unrivalled slip protection with powerful visual warnings.

Available in a wide range of colours including traditional black/yellow.

The are suitable for interior & exterior use - aggressively adhesive so they last longer indoors & out. Resistant to chemicals & fluids and designed for consistent slip resistance.

For more information on the range of Anti Slip products, please contact us on 01698 748290 or This email address is being protected from spambots. You need JavaScript enabled to view it.

JIT Industrial Products Ltd supply a range of silicone, acrylic and MS polymer sealants to suit a variety of applications.

SILICONE SEALANTS

Silicone sealants are available in both high & low modulus. High modulus sealants are best suited to internal applications as they accommodate less movement than the low modulus options.  Low modulus sealants are best suited to external applications as they accommodate more movement.

Parasilico AM85-1 is available in white, clear, black, brown, beige, anthracite or grey.  Suitable for external use on building & glazing applications.

Parasilico Monument is available in white,natural stone or black.  Replaces window mastic & traditional putties used in manufacture of timber sealed units.

FR Rated DetafireSilicone is available in white or grey.

ACRYLIC SEALANTS

Acrylic sealants are economical and paintable alternatives to silicone.  They are suitable for sealing & filling joints around aluminium, wood, uPVC windows and door frames.  External application of acrylic sealants are dependent on weather conditions - dry & preferably warm conditions are desired during application.  Acrylic sealants do not offer the flexibility of silicone sealants.

Paracryl SNJF is available in white, grey, black or brown.  Suitable for joints with low movement.

Paracryl Transparent is a clear acrylic sealant suitable for joints with low movement.

FR Rated Detafire Acrylic is available in white.

MS POLYMER SEALANTS

MS polymer sealants offer great durability, flexibility and offer excellent adhesion to non-porous surfaces.  They bond to damp surfaces are paintable making them a great "all rounder".  They are best used as an adhesive or sealant on surfaces that experience frequent vibration or strain.  They are also ideal for gluing panels, skirting boards, windows, mirrors and insulation materials.

Polymax Original Express - Available in white.

Polymax Crystal Clear - Available in transparent/clear.

Parabond 600 - Available in clear, white, black, dark brown & beige.

For more information on our sealants range, please contact the office on 01698 748290 or via email This email address is being protected from spambots. You need JavaScript enabled to view it.

JIT Industrial Products Ltd have been supplying packaging materials for over 27 years, but its not just pallet wrap, tape & strapping.

We offer a complete support service including: -

• Assessment & service/repairs of current machinery.
• Supply & installation of new or reconditioned machines.
• Training workshops to ensure your key personnel are getting the best from your investment.
• Service & maintenance contracts to ensure your machine is fully operational and minimises downtime.
• High yield, quality consumables - including machine stretch film (Super Power Pre-Stretch 270%) and quality cast hand stretch film.

For more information on our pallet wrap machines or consumables, please contact us on 01698 748290 or via email This email address is being protected from spambots. You need JavaScript enabled to view it.

High bond adhesives have always had their place in manufacturing, we also stock contact adhesives in all forms for bonding wood, over-laminates, plastics, rubber etc.  

Hotmelt adhesives and cold glues for more general applications and Superglue (cyanoacrylate), anaerobic and thread-locking adhesives for engineering applications.

In the electronics industry we supply a range of adhesives with electrical, mechanical and thermal properties to meet with demanding applications as things get smaller and hotter.

For advice on the which adhesives would suit your application, please contact us on 01698 748290 or via email This email address is being protected from spambots. You need JavaScript enabled to view it.

In recent tests against a leading competitor, Hermes VC154 LL P240 discs gave 240% performance with regards to total stock removed and 80% longer life with regards to sanding time.

For more detailed information on the test results or if you have any questions, please contact the office on 01698 748290 or via email at This email address is being protected from spambots. You need JavaScript enabled to view it.

For best results, ensure surfaces are clean, dry and free from oil & grease.

Abrade - to provide a key, abrasion can enhance bond strength by up to 30%.

Clean - using a non-residual surface cleaner.

Prime - using a surface primer chemically alters the surface energy of the substrate to more readily accept adhesive and increases bond strength.

Application - apply bonding tape with the use of a roller, applying firm pressure.  Remove liner, apply second substrate and again apply firm pressure to the bond with the roller.

Bond strength is dependant upon the degree of adhesive to surface contact therefore firm application pressure develops better contact and resulting bond strength is improved.

After application bond strength will increase with 60% strength achieved within 20 minutes, 90% after 24 hours and 100% bond strength achieved after 72 hours.  Ultimate bond strength can be achieved sooner by exposing bond to high temperatures (i.e. +70^oC for 1 hour).

Application Temperature:   Ideal application range is +19^oC to +25^oC

Minimum Temperature: +10^oC - Try to avoid applying to surfaces below this temperature as adhesive becomes firmer and condensation will form on substrates.  High strength bonding tapes - plastic and crystal can be applied at lower temperatures but condensation must be removed immediately prior to bonding.

Surfaces requiring sealing - most porous surfaces i.e. concrete, wood etc., will require sealing to provide surface integrity. Some materials i.e. copper, brass, galvanised steel and plasticised vinyl may require priming to prevent interaction between adhesive and substrate.  Prime glass for applications in areas of high humidity with surface primer.

For technical support & advice for all bonding applications, please contact us on 01698 748290 or email This email address is being protected from spambots. You need JavaScript enabled to view it.

JIT high performance glazing tapes are designed specifically for window and door glazing applications.

Security Glazing Tape

A special enhanced strength closed cell PE foam, coated on both sides with a very high performance cross-linked pure acrylic adhesive and protected by our production aid film liner or a paper release liner.

• Improved tack, adhesion and dynamic strength
• Good gap-filling between slightly uneven materials.
• Very high shear strength even at high temperatures
• Good shear even at high temperatures
• Excellent resistance to water, solvents & plasticisers
• Excellent resistance to UV light and outdoor ageing
• Good adhesion to metals, glass, PVC and most paints
• Compatible with acrylic and poly-carbonate (tested by GE Plastics)
• Available with production aid film liner or paper release liner
• Temperature Range: -40^oC to +100^oC   (Min application temperature +10^oC)

Georgian Bar Tape

A strong polyethylene foam carrier coated on both sides with a heavy mass of high tack, crosslinked modified acrylic adhesive - resulting in a very aggressive high tack foam tape.

• Exremely high tack bonds immediately to almost all materials
• Good adhesion to rough an low energy surfaces.
• Good gap-filling on uneven mouldings and extrusions
• Exceptionally high strength foam carrier
• Good Shear, even at high temperatures
• Good resistance to solvents and plasticisers
• Excellent ageing and UV resistance
• Available with production aid film liner 
• Temperature Range: -40^oC to +80^oC   (Min application temperature +5^oC)

For more information on our range of Security Glazing & Georgian Bar Tapes, please contact us on 01698 748290 or via email This email address is being protected from spambots. You need JavaScript enabled to view it.

Thermal Spray Aluminium (TSA) provides excellent corrosion resistance properties and is typically utilised in subsea, marine, atmospheric and high temperature applications (up to 500^oC).

JIT Industrial Products offer a range of Plasma & TSA Thermal Spray Tapes: -

• available in Single, Double or Triple layer constructions
• tear and abrasion resistant
• very high temperature resistance
• meet flame retardancy of UL510
• offer good adhesion to many surfaces and ensure residue free masking on removal (even after long processing conditions).

For more information on our range of Heavy Engineering Tapes, please contact the office on 01698 748290 or via email This email address is being protected from spambots. You need JavaScript enabled to view it.

GUIDELINES - SANDING SOLID SURFACE SUBSTRATES WITH HERMES ORBITAL SANDER

Stage 1

Remove major defects using Hermes VC154 Long-life velour multihole P120 grit discs.

Use dry with dust extraction.

Stage 2

Remove all previous sanding marks with Hermes VC154 Long-life velour multihole P180 grit discs.

Use dry with dust extraction.

Stage 3

Remove all previous sanding marks with Hermes VC154 Long-life velour multihole P240 grit discs.

Use dry with dust extraction.

Stage 4

Remove all previous sanding marks with Hermes VC154 Long-life velour multihole P320 grit discs.

Use dry with dust extraction.

Stage 5

Remove all previous sanding marks with Hermes VC154 Long-life velour multihole P500 grit discs.

Use dry with dust extraction.  Clean surface.

Stage 6

Use Hermes P360 FINENET velour discs with light water spray.

Use without dust extraction.

Please do not hesitate to contact us on 01698 748290 or via email on This email address is being protected from spambots. You need JavaScript enabled to view it. if you have any questions or require further information on Hermes Performance Abrasives.

High Velocity Oxy Fuel (HVOF) Thermal Coatings are used to provide a high quality finish, proven to extend component lifespan beyond its original specifications.

JIT Industrial Products offer a range of copper/glass cloth HVOF masking tapes in 25mm and 50mm widths

For more information on our Heavy Engineering Tapes, please call the office on 01698 748290 or email This email address is being protected from spambots. You need JavaScript enabled to view it.

"I have dealt with JIT for over 15 years and I have found Nigel and his team an excellent company to deal with.  I always like to support local businesses and I have always received fantastic backup and support from JIT, they are always happy to go that extra mile to offer an excellent value and service."

Gary

Manufacturer

Food & Drinks Industry

SHOT BLAST TAPE

Shot blasting is used to prime and clean surfaces removing rust, scale or old coatings to expose clean bare metal ready for subsequent treatment.  It also provides an effective method of preparing a surface with a roughened profile which promotes adhesion of specialist coatings.

JIT Industrial Products offer a Black PVC Heavy Duty Shot Blast Tape and Triple Layer Tough Shot Blast Tape both of which are available in 25mm & 50mm widths.

You can view our case study here Shot Blast Tape or for more information on the range of Heavy Engineering Tapes available, please call the office on 01698 748290 or email This email address is being protected from spambots. You need JavaScript enabled to view it.

JIT's High Bond Powder Coating tape specifically targets bonding of bare metals prior to powder coating processes.  Heavy duty acrylic pressure sensitive adhesive capable of operating at high temperatures of 200°C +

Key Benefits

• Use on bare metals prior to powder coating and oven-stoving
• Virtually impervious to UV, temperature, ageing or chemicals making it ideal for durable, long-lasting signs in the harsest environments
• Can replace spot welds or mechanical fasteners
• Good solvent resistance
• Interior or exterior application
• Suitable for plasticised PVC but not low energy plastics
• Ultra high sheer with high cohesion - ensuring the tape (and bond) remain strong under stress
• Resists vibration, impact or shock

Watch the bond strength test video to see how well it performs

For more information on the powder coating tape please contact the office on 01698 748290 or via email: This email address is being protected from spambots. You need JavaScript enabled to view it.

The Hermes Orbital Sander is ideal for the sanding of lacquer, primer, filler and general purpose sanding and offers the following key benefits: -

• Optimum Handling – Provided by ergonomically shaped non slip handle.
• Curved alloy steel lever – To guarantee accurate switching on and off, even under extreme conditions.
• Additional security bolt – Prevents unintentional activation of the sander, increasing working security in accordance with EU security regulations EN792-8: 2001.
• Perfect machine control – Compressed air rate accurately controlled by a high performance valve.
• Speed can be set exactly – By manual speed control “on the fly” while working.
• Long Life bearings – Assured by new AirShield technology which protects the ball bearing from dirt and loss of lubricant
• 2 Directional load possible – As a result of long life, dual row, deep groove ball bearings which can simultaneously absorb axial and radical loads.
• Optimum dust extraction – From precisely-weighted Hermes backing pads and sturdy extraction dome.
• Long, maintenance-free working – Assured low vibration high performance rotor motor with a high degree of efficiency and low air consumption.

 Each Random Orbital Kit includes:

• 1xVEL-Backing pad Multihole, medium
• 15xVelour backed discs VC151 Longlife, multihole
• 1xAir inlet (compressed air inlet) Ø1/4”
• 1x Dust extraction adapter, Ø 1”
• 1x Precision engineering oil

Discs

Hermes discs are available in various hole configurations and in a wide range of grits to suit most applications.

VC154 Longlife VEL Discs (No Holes) in P240 & P320 are readily available from stock.

 Performance

Recent performance tests against their closest competitor confirmed Hermes offer substantial benefits such as: -

• Twice the life
• Improved stock removal
• Less changeovers

For further information on the Hermes range, please don’t hesitate to contact us on 01698 748290 or This email address is being protected from spambots. You need JavaScript enabled to view it.

Bill is the Kanban King of JIT Industrial Products Ltd., keeping our local Customers fully stocked on site with key components. 

For more information on how a Kanban Stock Management System could help you, call us on 01698 748290 or email This email address is being protected from spambots. You need JavaScript enabled to view it.

At JIT Industrial Products Ltd, we have a wide range of safety & maintenance tapes available including: -

• Anti Slip
• Lane/Hazard Marking
• Barrier
• PTFE Teflon Glass Cloth
• High Temperature Heat Seal Anti Stick (adhesive & non-adhesive backed)
• Roller Wrapping
• Surface Performance

JIT Gecko Tape is the high grab, double-sided, bonding tape suitable for a range of demanding applications where high grab is required.

It is ideal for use in construction applications where the high tack is used to hold substrates in place during bonding & curing.

Particularly good on difficult substrates: -

• Wood
• Tile
• Ceramic
• Granite
• Low Surface Energy Plastics
• Fabrics

For technical support and advice on bonding applications, please contact us on 01698 748290 or via email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Mykal DSI 3000 Floor Cleaner is a highly concentrated emulsifying citrus degreaser formulated to combine the cutting power of solvents with the lifting power or sufactants to remove oils, greases, inks, polishing compounds and lapping slurry.

For use in both manual & machine cleaning applications.