Thermal spray or plasma spray is the application of a thin coat of metal or ceramic to a surface at high pressure and extreme temperatures. Precise tape masking creates a temporary barrier to prevent the application of thermal spray coating to a specific area while removing cleanly and easily without leaving adhesive residue.

Why use them?
These performance coatings are used to enhance the precision metal parts in terms of wear, corrosion and/ or temperature resistance. They’re used widely in the marine, aerospace, automotive, energy and healthcare sector. These tapes have excellent strength and flexibility which allows for easy wrapping of complex shapes.

We supply plasma thermal spray tape and double and triple layered tape which are approved by leading aerospace companies worldwide. We also have specialist constructions tailored to specific needs using foil tape and glass cloth tape for extreme temperature such a HVOF (high velocity oxygen fuel).

Many of our thermal spray tapes are approved by Pratt & Whitney, Rolls Royce and GE.

Get in touch for a quote or more information 01698 748 290

JIT are excited to share a revolutionary new material in the world of silicone encapsulants for high pressure applications…

CHT SilSo SE2014 is a new, low specific gravity silicone designed to withstand high pressures.

Encapsulants used in high atmospheric pressure environments require the physical properties needed to resist the forces exerted upon the components and the elastomer used to encapsulate them.

If the material is too rigid and hard, it will transfer pressure to the component causing stress fractures and damage particularly to delicate electronics. On the other hand, if the elastomeric material is too soft, both the encapsulant and the components will distort under pressure causing failure through cracking or ingress of moisture or other contaminants. Therefore, there is a need to balance both the hardness and modulus of the material being selected.

CHT have formulated SilSo SE2014 specifically for these applications. Using specialist fillers resistant to high pressures, along with elastomeric silicone polymers, the resulting encapsulant protects against stress while remaining flexible enough to maintain contact with the components and enclosures.

Due to its unique fillers, it is resistant to withstand high under water pressure at 11,000 meters and 1000 bar making it a great material for water, blocking in under water cables. It is being used in umbilical cords found in deep sea submersibles, protecting the cables used for vital communications. It also has UL94-HB approval and a very low specific gravity making it an obvious choice for use in aerospace and aviation applications together with automotive electronics by reducing weight and providing cost savings. It is perfect for us in gas turbines, underground / subsurface electronics, high pressure test equipment, vacuum pumps and industrial cabling.

JIT are experts at delivering innovative solutions for complex and demanding applications, please contact us today to learn more about SilSo SE2014.

#siliconeengineering #spacetechnology #deepsea #submersible #umbilical #silicone #offshorewind #gasturbine #aviation #undergroundelectronics #underwaterelectronics #highpressureequipment #vacuumpumps #industrialcabling #windturbine #autoelectronics #engineering #chemistry #flameretardant #thermaltransfer #specialistsilicone

J.I.T. Industrial Products Ltd have worked in partnership with  Button-Fix and Parabond manufacturer DL Chemicals to establish a step by step guide to using Parabond FAST, a high bond polymer adhesive formulated for use with a wide range of construction materials to create a robust mounting for internal decorative high pressure laminate panels.

The process has undergone testing at DL Chemicals laboratories and used on Eurowall's installation in Santiago, Chile.

Using Button-Fix Type 1 Bonded with Parabond FAST allows high pressure laminate panels as thin as 6mm to be invisibly mounted with no visible screws or rivet fixings.

The J.I.T. adhesive application guide for interior high pressure laminate panels can be downloaded here.

For more information on the above, please don't hesitate to contact us on 01698 748290 or This email address is being protected from spambots. You need JavaScript enabled to view it.

During the webinar you will receive an introduction to the ergo range including the epoxy's & methacrylate's approved to DIN EN 45545-2 (European railway standard for fire safety in the transport industry) and hear how ergo 7440 solved the bondline read through issue on Ferrari's 488 Pista.

To register, email your contact details to This email address is being protected from spambots. You need JavaScript enabled to view it. before Tuesday 23rd March 2021 and we will forward the webinar link.

We are pleased to announce JIT Industrial Products Ltd are working in partnership with CHT UK Bridgewater (formally ACC Silicones) as their newly appointed Scottish Distributor.

"JIT have always been keen on continuous improvement, it's something our Customers have come to expect from us and I believe CHT's world class silicone elastomers will compliment & expand our product offering into the aerospace, automotive, electronics and lighting & LED industries."

Nigel Fleming, Managing Director, JIT Industrial Products Ltd.

The CHT products added to the JIT product range includes: -

• Adhesives
• Encapsulants
• Potting compounds
• Thermal transfer materials
• Cable coating for umbilicals

If you would like to discuss your application or find out more on the CHT product range, please don't hesitate to contact us on 01698 748290 or This email address is being protected from spambots. You need JavaScript enabled to view it.

Like most of you we hope to see greater easing of the lock-down restrictions and the safe return to work in the coming weeks & months.

JIT took the decision to remain open during the lock-down to support our Customers working in essential manufacturing and distribution.

As always, safety remains a top priority and as we have already been through the process of COVID-19 risk assessments and ensuring our facilities were suitably prepared, we wanted to share with you some of the resources we utilised in the hope if helps you with your planned return to work.

• Consult guidelines - information available on government websites, World Health Organisation & HSE.
• Risk Assessment - CIPD's COVID-19 template available here.
• Workplace - organise work areas to ensure people can adhere to social distancing - section off areas using tapes, floor decals and provide signage throughout to serve as a reminder to keep 2 metres apart from others. Where 2 metre distancing cannot be adhered to, sectional screening may be used to create a physical barrier between people.
• Hygiene - Provide adequate hand washing facilities with water, soap & paper towels and ensure hand sanitiser/wipes are available at multiple locations especially for those who are unable to access hand washing facilities - in vehicles/vans, warehouse etc.  Ensure cleaning & disinfectant materials are available for the regular cleaning of work stations & equipment/tools - especially if shared between operators.
• PPE - Follow the HSE guidelines on suitable mask, gloves etc

We hope the above helps with your plans for a safe return to work.

Don't forget, JIT are here & fully operational to support you with your consumable requirements. Please keep us in mind if you have any requirements for tapes, adhesives, sealants, films, abrasives, cleaning & degreasing products or packaging.

In addition to our existing stock holding of outdoor grade performance silicone and bonding polymers, we are working closely with the German manufacturer, ISO-Chemie to offer a wide range of expanding foams which are being specified as alternatives to conventional silicone and aerosol foams.

They offer better thermal properties in addition to peace of mind where expansion and contraction in building materials & structure has led to failings well short of the warranties & guarantees offered by the installer - in particular where height or access is a costly issue.

ISO BLOCO ONE is a special multi-functional all in one joint sealing tape with outstanding properties: -

• A-value of 0.00m³/[h-m-(daPa)^2/3] the pre-compressed tape is 100% air tight at the internal seal area, contributing in minimising heat loss by convection.
• Also possess an optimal vapour diffusion gradient from the inside outwards (40:1) enhancing the external transmission of moisture, enabling the joints to dry out quicker.
• Resistant to driven rain in excess of 1050Pa
• Can be installed in adverse weather conditions.
• Easy one step application for reliable seal - sealing a wide range of joint sizes with a minimum of tape dimensions.
• certified Passive House component
• 10 Year Function Warranty - on the conditions of the manufacturer (available on request).

It’s a new approach to installing windows and doors, but with the above benefits they have been well received by architects and are becoming specified more and more. (There are also FR products within the range).

For more information on the ISO-Chemie range, please contact us on 01698 748290 or This email address is being protected from spambots. You need JavaScript enabled to view it.

JIT Industrial Products Ltd. have recently been appointed distributor for Kisling Adhesives and their Ergo Health Friendly Adhesive range which includes: -

• Threadlockers - for fastening, securing & sealing threaded connections. Withstands vibrations and shock loads as well as constant mechanical loads. Fills the thread completely & prevents corrosion

• Hydraulics & pipe thread sealants - for leak-proof & pressure-resistant threaded pipe connections. The adhesive film is resistant against vibrations and to common industrially used liquids and gases. Available in various viscosities & strengths.

• Flange Sealants - instant gaskets for surface and flange sealing. Fit flanges or casings of any shape. Ideal safety against vibration and corrosion. High resistance against industrial gases, oils & other liquids.

• Retaining Compounds - retainer for high strength bonging of cylindrical components such as bearings, sleeves, bushings, gears, pulleys together with shafts and housings. Due to its gap bridging properties, the adhesive is also suitable for use with fitting tolerances. Good resistance against acids, alkalies and high temperatures.

• Cyanoacrylate instant adhesives - ensure fast and durable bonding of metals, plastics, elastomers, wood, plastic, stone and ceramics. They provide high impact resistance, flexibility as well as resistance to water and air humidity and many organic solvents. Optimal curing at room temperature. Solvent free.

Ergo health friendly adhesives offer a sustainable alternative to Loctite, Dow Corning etc. They have generated strong interest with those looking to improve their environmental credentials where REACH & ROSCH compliance are critical.

For more information on the Ergo range, please contact us on 01698 748290 or This email address is being protected from spambots. You need JavaScript enabled to view it.

JIT & key partners DL Chemicals, are in attendance at the FIT Show in Birmingham's NEC. The exhibition which runs from 21st to 23rd May is the UK's only exhibition for the window, door and glazing industry.

Nigel, Ryan, Steve & Piet are available to discuss the full range of sealants including Parabond, Parsilico, Sanitair & FR which have proven to be popular additions to our product range.

As JIT's MD Nigel Fleming commented "Sustainability & environmental responsibility are continuing themes throughout many industries at the moment and certainly at this year's FIT Show we have seen a strong interest in water based products over the conventional solvent based sealants. The foil chubs are also gaining in popularity over the traditional plastic cartridges - many of our customers have already made the transition to the foil chubs and feedback on the additional benefits has been very encouraging."

If you can't make it to the exhibition this year and would like more information on the range, please feel free to contact the office on 01698 748290 or This email address is being protected from spambots. You need JavaScript enabled to view it.

Gummed paper tapes have been around for years but have recently seen a resurgence in popularity as companies look to reduce their environmental footprint.

Not only are JIT's gummed paper tapes biodegradable, made from renewable resources and eco friendly, they also offer a host of benefits: -

• LESS WASTAGE - Used with tape dispensers which moisten & cut the tape to your required length, they dispense the exact amount of tape needed preventing unnecessary waste.
• COST EFFECTIVE - In most instances only one strip of gummed tape is needed instead of several strips of plastic tape - using less tape offers yet more cost savings.
• STRONG SEAL - When wet, the gummed paper tape penetrates into the fibre of the box forming an integral bond & effectively becomes part of the box.
• TAMPER EVIDENT - Cannot be removed from a box without leaving signs the parcel has been tampered with.
• LOOKS GOOD - Packages look well presented, secure & professional. Being easy to print on they also provide an opportunity to promote your brand.
• TEMPERATURE RESISTANT - Maintains its integrity even in extreme temperatures & humid conditions - perfect for long-term storage or need to ship or store your parcels in hot, humid or freezing conditions.

Our MD, Nigel Fleming, recently spoke with Packaging Scotland about the popularity of the gummed paper tapes and other eco-friendly packaging options in a recent article which you can view here.

For more information on the range of gummed paper tapes and the options available, call 01698 748290 or email us at This email address is being protected from spambots. You need JavaScript enabled to view it.

PRIVACY NOTICE IN COMPLIANCE WITH GENERAL DATA PROTECTION REGULATIONS

On 25^th May 2018, a new EU Data Protection law, the General Data Protection Regulation (GDPR) comes into effect.  The GDPR will allow individuals and companies in the EU to have more control over how their data is used and places certain obligations on businesses that process such data.

JIT Industrial Products Ltd is committed to protecting and respecting the privacy of those using the services of JIT Industrial Products Ltd and of those visiting our website www.jitwebsite.com.

This privacy notice explains how JIT Industrial Products Ltd., 16 Melford Road, Righead Industrial Estate, Bellshill, Lanarkshire, Scotland, ML4 3LR collects personal data, how it may be used, what rights you may have in relation to your personal data and how you can contact us.

Please note this Site may contain links to other third-party websites. We are only responsible for the privacy practices and security of the information we collect. We recommend that you check the privacy and security policies and procedures of each and every other website you visit.

1.         How we collect your personal data

We obtain Personal Data about you in both online & offline. We collect Personal Data when you:

• visit our website
• meet with our sales team
• contact our customer service team, attend our events/exhibitions/workshops or request information from us in any other way
• communicate with us via social media platforms, third party apps or similar technologies
• we may also collect information about you from third party sources such as sub-contractors and service providers.

2.         What personal data we collect

When you visit, register on or submit enquiries to JIT Industrial Products Ltd you may be asked to provide certain information about yourself including your name and contact details.  We may also collect information about you from correspondence you send to us.  We may process the following Personal Data about you for the purposes listed in paragraph 3 below:

• Company Name
• Company Registration & VAT Number
• Company Registered address (including site locations)
• Company Contacts - including email addresses, phone, fax & mobile numbers
• Bank Account Details
• Transaction history (historical sales/purchasing data)
• your Internet Protocol (IP) address
• information in the public domain such as social media user name or ID
• Device ID (Desktop, Tablet or Mobile)

On occasion we may collect data from 3^rd party sources such as social media posts, trade publications or online publicly available sources, if we feel we have a product or service which may be of benefit to you in a business capacity.  Initial contact is usually by telephone during which we will request your consent to email the relevant information.

3.         The purposes for which we process your personal data

We may process your Personal Data for the following purposes:

• to provide you with information, products and services enquired or ordered by you
• to provide customer support
• to provide you with personalised marketing communications
• to notify you of any changes to services & to provide you with information in relation to similar goods & services that may be of interest to you
• to conduct marketing analysis to allow us to assess trends and the effectiveness of our advertising & marketing campaigns
• to administer our site and help improve our products & services
• to detect and prevent fraud
• to comply with applicable laws & regulations

Data protection law requires us to have a legal ground before processing any Personal Data about you.The legal grounds for us processing your Personal Data for the above purposes will typically be because:

• you have provide your consent
• it is necessary for the performance of a contract with you or to decide whether to enter into a contract with you
• the processing is necessary for our compliance with a legal or regulatory obligation
• the processing is in our legitimate interest as a leading supplier of industrial products

4.         Who we share your personal data with

We may share information about you with third parties in certain circumstances including in the following situations:

• Sharing your information with service providers - we may share information with companies or individuals, if necessary, that provide us with services. These services may include, among other things, helping us to provide services that you request, to create or maintain our databases, to prepare and distribute communications or to respond to enquiries. 
• Sharing your information as permitted by law - we may share your information with others as required by, or permitted by, law. This may include sharing your information with government entities, or third parties in response to subpoenas, court orders, other legal process, or as we believe is necessary to exercise our legal rights and/or to protect the property or safety of our customers or others (including exchanging information with other companies & organisations for the purposes of fraud protection and credit risk reduction), to defend against legal claims that have been brought against us, or to defend against possible legal claims that we determine in our sole discretion might be brought against us.
• Blogs, articles, cast studies & testimonials - We may decide to allow users to share comments, postings, testimonials or other information. If you choose to submit such information to us, the information that you submit may be available generally to the public. Information that you provide in these areas may be read, collected, and used by others who access them.
• Business transaction - In the event that we, or any portion of our assets, are acquired or we undertake a business or asset acquisition or prospective acquisition process, your information may be transferred to the acquiring company or other entity surviving such a transaction.
• Other third parties - We may share non-personal data with our third parties that are not described above. When we do so we may aggregate our de-identify the information so that a third party would not be likely to link data to you, your computer or your device. Aggregation means that we combine the non-personal data of numerous people together so that the data does not relate to any one person. De-identify means that we attempt to remove or change certain pieces of information that might be used to link data to a particular person. 

5.         Managing your privacy

GDPR sets out a number of user rights to manage and protect your personal data

• The right to be informed of how we process your data.
• The right of users to access their data
• The right to rectification which simply means the right to correct any incorrect data being held.
• The right to erasure, commonly known as the “right to be forgotten” meaning the right to have certain kinds of data deleted under certain circumstances.
• The right to restrict processing meaning the right for a user to ask you to stop using their data in certain ways.
• The right to data portability, meaning the users right to download the data held and upload to a different service provider.
• The right to object, meaning a user’s right to object to your uses of their data and
• Rights in relation to automated decision making and profiling, which largely pertains to data used for the purposes of advertising, marketing and behavioural analysis.

For further information on the above rights or to submit a subject access request, please email This email address is being protected from spambots. You need JavaScript enabled to view it.

6.         Children

JIT Industrial Products is committed to protecting the online privacy of children and making the internet safe. We do not provide products and services to children, or knowingly collect or solicit Personal Data from children without parental consent when consent is required by the local applicable laws.

7.         Transfer of personal data

Your Personal Data may be transferred outside of the country from which it was originally provided and may be shared with our trusted third parties located in jurisdictions outside European Economic Area (EEA) and the UK which have no data protection laws or laws that are less strict compared with those in Europe. Whenever we transfer Personal Data outside of the EEA or the UK, we take legally required steps to make sure that adequate safeguards are in place to protect your Personal Data and to make sure it is treated securely and in accordance with this Privacy Policy. If you are located in the EEA or the UK, you can contact us (see section 10. Questions and Complaints) for a copy of the safeguards which we have put in place to protect your Personal Data and privacy rights in these circumstances.

8.         Data Retention

We retain your Personal Data for as long as necessary to provide the products and services you have requested, or for other essential purposes such as complying with legal obligations, resolving disputes, and enforcing our agreements.

9.         Your Rights

Data protection law gives rights to individuals in respect of Personal Data that organisations hold about them. You may:

• request a copy of the Personal Data that we hold about you
• request that we rectify, restrict or delete your personal data
• if you decide that you do not want to receive commercial emails from us, you can “opt-out” from receiving such emails by replying to the email with “unsubscribe” in the subject line. If you would like to exercise your rights, please contact us using the contact information set out in paragraph 10 below. Please note that requests to exercise data protection rights will be assessed by JIT Industrial Products Ltd on a case-by-case basis and actioned in a timely manner in accordance with GDPR compliance. There may be circumstances where we are not legally required to comply with your request because of the laws in your jurisdiction or because of exemptions provided for in data protection legislation.

10.        Questions & Complaints

If you have any questions about our Privacy Policy, you can contact us by emailing This email address is being protected from spambots. You need JavaScript enabled to view it. or by writing to us at JIT Industrial Products Ltd., 16 Melford Road, Righead Industrial Estate, Bellshill, Lanarkshire, Scotland ML4 3LR. 

If you are still dissatisfied, you have the right to complain to your Data Protection Authority; however, all complaints should be raised with JIT Industrial Products Ltd.in the first instance.

Further information on GDPR can be obtained from Information Commissioner’s Office

11.        Changes to the privacy policy

We may modify or amend this Privacy Policy at any time by posting the revised Privacy Policy on our Site. We recommend that you review our Privacy Policy every time you submit information to us or place an order.

When JIT were approached by the team at Button-Fix for assistance with bonding their ABS mouldings to stone & glass, we were happy to help.  Drawing upon our 28 years of experience of bonding applications, we knew the Parabond product would be ideal.  Button-Fix were particularly impressed with the samples we sent for evaluation and settled upon the Parabond FAST as the optimal solution for such applications.

When Button-Fix expanded its range of interior panel fixings to include a bonded version, we looked for suitable adhesives to attach our ABS mouldings to a wide range of different materials and Parabond FAST has proved to be a very strong and resilient solution.  We have been able to expand our market beyond wood-based panelling and can now offer a secure and reliable way to secretly fix panel materials such as stone or opaque glass.

B. Wilson, Director, Button-Fix

As each application is different, why not take advantage of our technical support service and contact us on 01698 748290 or This email address is being protected from spambots. You need JavaScript enabled to view it. for advice and product selection to suit your project.

JIT are proud to have products used in the construction of HMS Queen Elizabeth.  The 65,000 tonne aircraft carrier emerged from its dockyard at Rosyth at the end of June and and after completing sea trials, sailed into its home port of Portsmouth on Wednesday 16th August.

A second carrier, The Prince of Wales, is also being built at Rosyth and is still covered in scaffolding.

Each carrier can hold 36 planes and 4 helicopters and is manned by a crew of approx. 700.

JIT's Fire Retardant Neoprene Seals were used in the construction of the 750 doors on board the HMS Queen Elizabeth which can seal off compartments in the event of fire.

At JIT we are proud of our involvement with this project and prouder still to work in partnership with some of the UK's biggest companies.

Contact us on 01698 748290 or This email address is being protected from spambots. You need JavaScript enabled to view it. to find out how we can help with your projects.

Team JIT would like to say a big thank you to all those who supported our efforts to raise funds for the Butterfly Trust.

We completed the 5K Big Fun Run at Glasgow's Bellahouston Park on Saturday 29th July and managed to smash our fundraising target in the process.

The team at JIT are in training for the Big Fun Run Glasgow to raise funds for the Cystic Fibrosis charity the Butterfly Trust.

The Butterfly Trust provides practical help, emotional support and counselling to the Cystic Fibrosis community in Scotland.  It is a charity very close to our hearts as my nephew was diagnosed with Cystic Fibrosis at birth.  He is now 4 and starts school in August.  He is doing well and doesn't let his illness stand in his way or stop him from doing anything other kids his age do.  He is an amazing little boy but we wanted to acknowledge the help we have been given by the Butterfly Trust and do what we can to raise some much needed funds to ensure they continue to provide help to others with Cystic Fibrosis.

All services offered by the Butterfly Trust are confidential and provided free of charge. For more information visit www.butterflytrust.org.uk

If you would like to support our fundraising efforts you can donate via our Just Giving Page - www.justgiving.com/fundraising/Team-JIT

All donations are greatly appreciated.  Thank you.

JIT's protective tapes are designed to offer protection from dirt and damage such as scratches & scuffs during processing, storage and handling.  From glass, painted or bare metals, wood, composite to plastics, marble and carpet, JIT have a protective tape to suit your application.

Available in a range of thicknesses and colours we can provide you with sizes to suit from 15mm to 2500mm widths and 25m to 2000m lengths.  Tapes can be supplied standard or reverse wound, plain or printed with your name or logo (subject to minimum orders). 

GLASS PROTECTION - Blue, Clear or Green offering excellent light abrasion resistance and residue free when removed*.

PVC PROFILE PROTECTION - Black, White, Clear or Blue - can be cut to widths & lengths to suit your application.

SHEET METAL PROTECTION - Painted, bare, polished or grained, we have a protective tape to suit and can offer a directional pattern to ensure the grain is correct during installation.

LASER & FIBRE OPTIC LASER - It is important to use the correct protective tape when cutting sheet metal with either standard or fibre optic laser - both products are available and can be slit to your requirements.

AUTOMOTIVE INTERIOR & EXTERIOR PROTECTION - Our films & tapes carry various automotive approvals and have been tested in the most demanding environments.

*Window films should always be removed in temperatures between 10C and 40C.  Peel the film at a slow, constant speed to remove and avoid rapid snatching.  All protection films have an external exposure life so please contact us to discuss your application and we can advise the most suitable product.

For more information on our protective tapes, please call 01698 748290 or email This email address is being protected from spambots. You need JavaScript enabled to view it.

We have recently updated our online store to include the latest addition to our stock holding. Our range of sealants now include Parabond 600 MS Polymer and Parasilico AM85-1 Silicone Sealants.

PARABOND 600 is a solvent & isocyanate free,  MS polymer based, durable and fast curing elastic adhesive.  It has a very high initial strength and bonds without primer on most materials used in the construction industry such as aluminium, galvanised and stainless steel, zinc, copper, natural stone, concrete, brick, cement based cover sheeting, HPL panels, treated wood, gypsum, glazing, various synthetic materials etc.  Parabond 600 is suitable for gluing and fitting of safety glass in the banking industry and fitting of cable ducts, mitres in aluminium windows, mirrors, structural gluing of panels and elements in the professional interior and ceiling construction    

PARASILICO AM85-1 is a non-toxic, solvent-free, low modulus, multipurpose silicone sealant with good UV, weather and ageing resistance, low and high temperatures (-50oC ti +150oC).  AM85-1 has an adhesive strength without primer on the majority of materials used in building and engineering industries such as laminated glass (does not affect the layer PVB) and double glass (does not affect the butyl sealing), aluminium, steel, abs, stainless steel, anodised steel etc.  It also has an outstanding adhesion without primer on treated wood and PVC and can be used on alkali surfaces such as concrete & bricks.

For more information on the above or any other product, please don't hesitate to contact us on 01698 748290 or This email address is being protected from spambots. You need JavaScript enabled to view it. .

Subscribe to our blog posts for further product updates and new additions to the product range.

When you have been supplying bonding solutions for over 28 years, there's not many applications the team at JIT haven't seen before.

We were recently called upon to assist our Customer with a bonding dilemma, how to bond 1mm thick mild steel to melamine faced chipboard to provide a long term fix and yet allow the material to be handled in a timely manner without compromising the bond.

After discussions with our Customer, Nigel (our bonding maestro) was happy to visit to site to demonstrate how the JIT Gecko Tape can be used to secure the substrates in position while the bonding adhesive cures to full capacity - as used successfully in the Liverpool One project.

If you would like further information on our bonding solutions or would like to discuss your application/project with one of our Technical team, please call on 01698 748290 or email the details to This email address is being protected from spambots. You need JavaScript enabled to view it.

JIT are proud to announce another new edition to their performance film range.

The engineered machine film is available in 1900 metre reels, a third more than the conventional films.

Benefits

• 1900 metres of engineered cast film for the same price as 1200 metres conventional roll.
• Offers substantial savings in usage, cost, wastage and landfill.
• High Quality Wrap with firm hold.
• Resistant to sharp edges & corners.

For more information on our films or any other JIT product, please contact the office 01698 748290 or via email This email address is being protected from spambots. You need JavaScript enabled to view it.

Our Customer, a leading cladding & roofing contractor, required a black foil moisture barrier tape to seal foil face insulation on their site in Edinburgh.

We supplied our 30 micron soft tempered matt black aluminium foil tape coated with a pure acrylic adhesive and Class O approved to meet the demands of the project.

Benefits & Applications

• Class O Approved
• Applies & conforms easily to both fibrous & sheet metal ducting.
• Applications include: insulation, cladding, moisture barrier & protection.

Application Guidelines

1. Clean surfaces with IPA cleaner.
2. Ensure surfaces are clean, dry and dust free.
3. Apply foil tape with firm pressure.

For more information on our foil tapes, or any other JIT product, please contact the office 01698 748290 or via email This email address is being protected from spambots. You need JavaScript enabled to view it.